MacGyver it: DIY Legwarmers

← Back

Thank you for your response. ✨

I have some special socks that I like and keep my poor toes happy (these socks from Orthofeet). But the first set I bought is short, and cold weather means cold ankles. If this were the 80s, leg warmers would be available everywhere, but alas, it is not the 80s, so they are hard to come by. 

I pulled on some heavy wool socks and realized they had holes in the soles. I set them aside, thinking I might practice my extremely nascent darning with them. Then one morning when the “feels like” temperature made me want to cry, I had the thought that I could cut off the soles and voilà! Leg warmers! I cut off the soles and pulled them on. Toasty ankles. Ahhhh. 

The calf-height Orthofeet socks are back in stock now, so I have more options. 


Photo by Maria Kovalets on Unsplash

Continue ReadingMacGyver it: DIY Legwarmers

Fixing Stuff: Maintenance that sucks

The only time maintenance should suck is when you are working on vacuums. Clogged vacuums lose suction and make it harder to get your floors clean quickly.

This past month was all about vacuums. I have three: two uprights that are both Shark Navigator bagless vacuums, and a Black and Decker stick vac with a handheld unit that pops out.

I’ve had all three for eight years or more. Honestly, I thought the stick vacuum was a goner,  only good for a recycling opportunity. So, I am happy to report that all three are up and running! I often clean the vacuums (not often enough, TBH), but this time around, I bought replacement filters. The uprights have a felt filter, a foam filter, and a HEPA filter. I was just about today-years-old when I realized the HEPA filter could and should be removed and replaced annually. Oops. I tracked down replacements for both Shark models.

One small piece of bad news on one of the vacs: The hinge that opens the dust cup is broken in half. It has a rubber gasket and is held in place by three clips, so it’s not going anywhere, but I did find a replacement dust cup on the Shark website. (“Dust cup” is a misnomer for upright canister vacs. It’s more like a dust gallon.) We have both white and black uprights, and the white vacuum is really dinged up. I would not buy a white vacuum in the future.

The handheld portion of the stick vacuum had a clogged filter. I had to remove covers to do this, so it’s not for the faint of heart (or for anything under warranty). The stick vacuum also uses a filter that should be washed regularly and replaced eventually. Eventually came. The replacements were easy to find and readily available.

Do-it-yourself

If you have the manual, you can often find all the info you need on maintaining your vacuum. If you don’t, look for the model number and search for the manual and/or the parts you might need. Enterprising people will try to sell you manuals, but most can be found online free of charge.

Aftermarket parts are often available; depending on the part, they can work very well. There’s no hard and fast rule here. It’s a learn-by-doing kind of thing. I was lucky to find parts that look like identical replacements. Remember to clean the roller (a seam ripper is great for removing anything wrapped around the roller) and wipe down the vacuum with a damp cloth.


Photo by No Revisions on Unsplash

Continue ReadingFixing Stuff: Maintenance that sucks

Becoming MacGyver

I’ve written before that I am a big MacGyver fan. The man could get out of any jam with gum, paper clips, string, and some tape. I’m on a mission to repair stuff. I’m not MacGyver level yet, but that’s my goal. I’m learning how to service sewing machines. Vintage Kenmore 158s are my jam, but I also have a Singer Rocketeer. I’ve learned so much in a short period, and I’m now the proud owner of Bluecreeper penetrating oil, pick tools, pry tools, and an impressive assortment of tweezers. I now have a small fleet of machines that need cleaning and some cosmetic work.

My most recent repairs include a poly resin cat statue with a shattered front paw. I thought my poor kitty was broken beyond repair. It sat for years in a window positioned so the break wasn’t clearly visible. But it has sentimental value, so I held out hope as I searched YouTube videos for repair ideas. Eventually, I decided it was time. I started by supergluing the pieces I could find and then built some armature in the front leg with modeling clay and wire. It looks 100 times better, but still felt a little wobbly, so I used some glue to fill in the cracks. I repainted it with a dark blue-gray base layer that looks good, but I plan to go back with a mix of grays and blues to give it a Russian Blue-like coat.

I also repaired my accordion-style wood drying rack. I overloaded it a while back and broke one of the cross braces that hold it upright. It sat broken for a long time. But the cat statue gave me confidence that it was fixable. Some glue and clamps, and it’s fully operational again.

Tell me about your repairs! What’s your “I-can’t-believe-I-fixed-it” story?


Photo by Андрей Сизов on Unsplash

Continue ReadingBecoming MacGyver

No more posts to load